Honda XR250 for sale.
Rough condition, no reg card, has plate.
Work bike, currently needs CDI repaired or replaced to run. Comes with spare new ignition coil, starter solenoid, oil and fuel filter, may have a rear sprocket around the place too.
Rear brake master cylinder in need of repair. Seat needs new foam and cover. No taillight or turn signals.
Engine is okay, had top end rebuilt around 4K ago.
USD forks in okay condition on front, no nicks or scratches on tubes. Plastic fuel tank model.
Battered SuperTrapp exhaust on back.
Needs new tires, spokes on wheels are rusty.
Good bike to rattle around on as is, or spend a few dollars to make it clean and tidy.
Looks better in these pics than real life:
Surplus to requirements here.
Pm me.
Xr250 (2002) for sale $475
Vlad is salivating.
He can can ALMOST afford it.
Alas............he still cannot get his leg over it.....
He can can ALMOST afford it.
Alas............he still cannot get his leg over it.....
Rated R for Ricecakes
- vladimir
- Feminist Watch List
- Reactions: 4
- Posts: 34235
- Joined: Thu Sep 23, 2004 7:43 am
- Location: mod edit
Indeed, great price.ricecakes wrote:Vlad is salivating.
He can can ALMOST afford it.
Alas............he still cannot get his leg over it.....
What are the HP installments?
There is no bogan poofy-box on the back, ricecakes, easy to get my leg over.
ירי ילדים והפצצת אזרחים דורש אומץ, כמו גם הטרדה מינית של עובדי ההוראה.
-
- Where Did All the People Go?
- Reactions: 42
- Posts: 2555
- Joined: Fri Aug 27, 2010 12:04 am
- Location: RESISTANCE IS NOT FUTILE. IT'S VOLTAGE DIVIDED BY CURRENT.
A few current pictures. Note sorry looking seat.
Spare parts: serviceable 40 tooth rear sprocket, Nachi Japanese wheel bearings, oil filter, 2 X clutch cables, ignition coil, new, and old starter solenoid (new one fitted).
Bike has new oil and filter at moment.
Will need new air filter, old one pretty nasty. Wiring around battery pretty hacked, but functional.
Faulty CDI. Pretty sure a staff member jump started it from a running car and shorted this out. Possibly can be cut open and repaired, or replace with new or secondhand one.
Reg plate not pictured, but being sent with bike.
Bike will be in Phnom Penh tonight, subject to the whims of the taxi driver whose vehicle it is currently strapped to. Will have been washed after it gets there also.
Pm for contact details of person who will take delivery of it.
thanks!
-
- I Am Losing It All to the Internet
- Reactions: 0
- Posts: 1476
- Joined: Mon Nov 26, 2012 5:44 pm
Smashing first time bike.
If there's tread on the tyres, brakes and lights work and the suspension ain't bust then if it runs it's worth a punt.
If there's tread on the tyres, brakes and lights work and the suspension ain't bust then if it runs it's worth a punt.
I tell you one thing Jackal.
YOU NEED A NEW WORK BENCH
YOU NEED A NEW WORK BENCH
Rated R for Ricecakes
-
- Where Did All the People Go?
- Reactions: 42
- Posts: 2555
- Joined: Fri Aug 27, 2010 12:04 am
- Location: RESISTANCE IS NOT FUTILE. IT'S VOLTAGE DIVIDED BY CURRENT.
Probably less. Been a while, but I had a three part cover stitched out of breathable material for a different 250 for $8. A few foam off cuts, glue and a sharp knife and it would be good as new.
Anybody interested should call me on snip, as this will likely sell today, and is available for viewing near psar tumnup toul kork.
Anybody interested should call me on snip, as this will likely sell today, and is available for viewing near psar tumnup toul kork.
Last edited by Jackal on Tue Sep 13, 2016 1:59 pm, edited 1 time in total.
-
- Where Did All the People Go?
- Reactions: 42
- Posts: 2555
- Joined: Fri Aug 27, 2010 12:04 am
- Location: RESISTANCE IS NOT FUTILE. IT'S VOLTAGE DIVIDED BY CURRENT.
ricecakes wrote:I tell you one thing Jackal.
YOU NEED A NEW WORK BENCH
That's not a work bench. That's what remains of the cashiers desk from the old frog and shamrock on riverside
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 2154 Views
-
Last post by ricecakes
Thu Aug 05, 2021 3:14 pm
-
- 47 Replies
- 10146 Views
-
Last post by stevecz
Tue May 31, 2022 12:15 pm
-
- 4 Replies
- 1773 Views
-
Last post by Thorix
Tue Feb 16, 2021 6:22 pm
-
- 23 Replies
- 4514 Views
-
Last post by Ibenthereto
Tue Sep 07, 2021 12:31 pm
-
- 0 Replies
- 942 Views
-
Last post by wzmsys
Sat May 13, 2023 1:44 pm